The Takacat Double Kayak is the redesigned kayak from Takacat. It offers advantages for all those who want comfort and unique features even when kayaking.

The advantages of a catamaran are a super stable position in the water| a ride like on two rails| getting in and out of the kayak via the open bow is effortless| even out of the water back into the kayak| plenty of space for dogs as well as luggage travelling with you.

Generous continuous load area

So the Takacat Double Kayak offers plenty of loading space for 2 people with luggage| parent with a child or for one/two people with one or more dogs.

29cm drive hoses with protective strips on the undersides

The two driving hoses with their 29cm diameter are well proportioned for a maximum load of 260Kg and are powerfully supported by the large-surface high-pressure floor. The lower connecting floor between the two drive hoses additionally protects the inner high-pressure floor in case of ground contact and during landing.

10PSI "Drop-Stitch" high pressure floor

The 8cm thick high-pressure floor can be inflated with an operating pressure of up to 10PSI = 689mbar thanks to its drop-stitch technology. This creates a stable loading platform and shields the entire seating and loading area from the water surface.

3 air chambers + safety overpressure valves

Each driving hose is equipped with a Halkey-Roberts valve at the stern and an overpressure safety valve at the bow. Accidental over-pumping of the tubes is therefore impossible and harmful pressure increases due to strong sunlight are also avoided. The Takayak-395 has a total of 3 independent large-volume air chambers.

One-seam design + 5-layer PVC fabric skin

One-seam design means that each tube is made from a single piece of skin. The tubes have only one longitudinal seam on the outside| which is additionally covered with a resistant 1mm thick protective strip and thus doubly secured. At the bow and stern| the so-called bumpers (end pieces) are then glued in| also double-secured. The One-Seam design reduces the number of seams and seam intersections by over 50% compared to half-shell production and thus significantly reduces the possibility of possible leaks in the seam areas. The 5-ply fabric-reinforced PVC skin with 0.9mm thickness and 1000 dtex meets the standard of quality inflatable boats. Optionally| the Takayak-395 can also be manufactured in 1mm Hypalon/CSM.
Open bow and stern

The open bow and stern create a forced bilge. Water that penetrates the Takayak-395| e.g. due to an overflowing wave or heavy rain| immediately escapes again; no bilge valve can realise such a bilge capability. Another advantage is that it is easy to return out of the water. No time-consuming safety and re-entry training is necessary