This 1358mm/53.5'' long| full-size Slimline II cargo roof rack kit contains the Slimline II Tray| Wind Deflector and 3 pairs of Rail Grip Feet to mount the Slimline II Tray to the roof rails of your Ford Explorer. This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit. This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. For a stronger expedition grade cargo carrying solution| Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted. All Front Runner Racks are backed by a Limited Lifetime Warranty* Factory Rail Rack Kits are designed as a ''light duty'' cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits. For optimal load carrying capacity| we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. Please contact us for advice on specific mounting solutions for your vehicle and use. Note: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg| and ensure the load is distributed evenly.
KRFE004T - Ford Explorer (2020-Current) Slimline II Roof Rail Rack Kit - by Front Runner   Consisting of: 3 x GOFR001 - Rail Foot Base (Pair) - by Front Runner3 x GOFR010 - Flush Rail Outer Grips / No. 1 - by Front Runner3 x GOFR035 - Flush Rail Inner Grips / F - by Front Runner1 x RRAC904 - Plastic Spacer for Foot Rail Base / 10mm (pair) - by Front Runner1 x RRSTG07 - Slimline II Tray - 1345mm(W) X 1358mm(L) - by Front Runner   Material used: Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight 21.6kg (47.6lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 440mm (17.3'')Length 1730mm (68.1'')Height 150mm (5.9'')   Shipping Weight: Weight 26.4kg (58.2lbs)
SKU KRFE004T
Barcode # 6009542200088
Brand Front Runner
Shipping Weight 26.0000kg
Shipping Width 1.730m
Shipping Height 0.150m
Shipping Length 0.440m

Be The First To Review This Product!

Help other 4WD Industries users shop smarter by writing reviews for products you have purchased.

Write a product review