AUTOSTRADA E-Cruise Toyota Prado 90 Series 1999-2003 3.0L TDi LH Stalk - EC-TY19LH

Built to suit the Toyota Prado 1999-2003 3.0L TDi variant| this model-specific Autostrada E-Cruise kit arrives pre-programmed for a quick| trouble-free install — no calibration| minimal wiring| and a left-hand stalk switch for an OEM look and feel. Engineered for Drive-By-Wire and CANBUS systems and made to order in Australia.

Photo for Illustrative purposes your kit may look different. If you are unsure please get in contact so we can assist you with the correct kit and preference of switch!

This vehicle specific pre-programmed cruise control kit comes with comprehensive fitting and operating instructions. Once installed this kit will provide years of reliable operation.

Benefits of Autostrada E-Cruise Controls:

No field programming or calibration required
Plug & Play model specific kit
Minimal to no soldering
Quick trouble free installation
On-board diagnostic tools
Engineering for Drive-By-Wire and CANBUS systems
Range of quality OEM style control switches

Autostrada make this guarantee:

"We are so confident in our E-Cruise Control product that we'll match the vehicle manufacturer's warranty. Which can be up to five years on new vehicle installations. Installations into a used vehicle come with a two year / 40000km warranty. In the unlikely event of product problems support is not far away."

Autostrada Cruise Control Kits are built and programmed to suit your specific vehicle.
You must provide us the following information before your kit can be sent out:

Vehicle Build Date
Transmission Type
Engine Capacity
Wheel Controls (are there media/radio controls on your steering wheel)
Please attach this information to your Buyer's Note.

All attempts are made to dispatch your Autostrada kit as soon as possible. However please note that these are made to order. 1-3 Business days minimum lead time should be expected for all orders. In rare circumstances it can take longer.